BiLine: Shading with Lumero plus wind detection with Sensero

Shading with Lumero plus wind measurement with Sensero

Problem

If a BiLine Sensero (or Aero) is used on a device for wind detection and a Lumero is additionally used for brightness detection (with the brightness potentiometer on the Sensero/Aero set to Off), the Lumero (automatic shading in Combio) no longer functions.

Workaround

Set the threshold value on the Sensero to 14 (11 for the Aero). This will restore the automatic shading function in the Combio. Since, in typical applications, a light sensor (Lumero) is usually installed on each facade and the Sensero is additionally placed on one of these facades (or facing the same direction), this will work well provided the threshold value on the Lumero is set optimally.

In the Compact system (V1/V2 receiver, without plastic housing), this still worked (one Sensero and one Lumero programmed on Combio, brightness set to Off on the Sensero, brightness detection/shading via Lumero).

Occurs in version

• .10.
• 261.12.04.00.06
• 262.12.04.00 rk08
• 67.11.03.10.20