BiLine Astro Tec: Time commands are executed

Time commands are executed even though the AstroTec toggle switch is set to "Manual"

Description

Previously (AstroTec, Compact or ProLine1), if the AstroTec slide switch was set to "Manual," the device did not send any commands. The
following appears to be new with BiLine (ProLine2):
The "Priority" and "Shading" settings are now only partially affected by the slide switch. (!)
If the AstroTec slide switch is set to "Manual" and only "Priority" is enabled, no time commands are executed (ok)
If the AstroTec slide switch is set to "Manual" and only "Shading" is enabled, time commands are executed where the local control (e.g., UniTec) is set to automatic (new, possibly a desired new feature?)
If the toggle switch on the AstroTec is set to "Manual" and both "Priority" and "Shading" are activated, all blinds respond to the time commands.

Workaround

Use version >=15

Occurs in version

• .10.
• .11.
• .13
• .14