BiLine: Semi-automatic

Semi-automatic

Problem

The control system is in Auto mode. As soon as you press a button on your AeroTec, it switches to semi-automatic mode.
In semi-automatic mode, the automatic sun protection function is (temporarily) deactivated. Automatic movements triggered by the light levels falling below or exceeding the set thresholds will not occur. The system remains in the current position, and the display shows the set and actual values.
The wind sensor remains active.

Workaround

Semi-automatic mode is exited when:
- A wind alarm occurs,
or - The slide switch is briefly set to "Manual" and then back to "AUTO",
or - The upper end position is reached using the UP button,
or - The actual brightness value falls below "Level 1"

Occurs in version

• .24.